Ukslc.org Articles Sound Mixer Insert List
Mixer Insert List Print E-mail
Saturday, 07 May 2005 21:13
Article Index
Mixer Insert List
1/4inch TRS single jack, TIP send, RING return
1/4inch TRS single jack, RING send, TIP return
1/4inch TRS dual jacks, BALANCED send and return
Bantam TT jacks, BALANCED send and return
1/4inch dual jacks, UNBALANCED send and BALANCED return
1/4inch TS dual jacks, UNBALANCED send and return
XLR dual jacks, balanced, pin 2 hot
RCA dual jacks, unbalanced
All Pages
XLR dual jacks, balanced, pin 2 hot:


Crest LM (models before 1996) (+4dB channel inserts balanced TRS, L & R inserts are XLR +4dB)

Yamaha PM1D (2001) (Any input or mix output can be assigned inserts. Each insert is soft patched and uses up two hardware jacks that would otherwise be available for normal input and output. Insert points are selectable pre- or post- EQ, Comp, Delay, 'ON' and Fader. Inserts are switchable ON/OFF once assigned. Inserts can be analog or digital depending on the inserted device and the I/O module used.)

Yamaha DM2000 (24 analog A/B inputs have a set of permanent +4dBu BALANCED TRS DUAL inserts pre-A/D. Additionally, any input or mix output can be assigned inserts. Each insert is soft patched and uses up two hardware jacks that would otherwise be available for normal input and output. Insert points are selectable pre- or post- EQ, Comp, Delay, 'ON' and Fader. Inserts are switchable ON/OFF once assigned. Inserts can be analog or digital depending on the inserted device and the I/O module used.)