At some point after programming the show you are very likely to need to Edit or add in a new memory so here is another set of simple step by step instructions:

Editing a Memory:

1. Turn Key to Program

2. Select the Memory you want to edit using the memory +/- buttons.

3. Put Blue (/preset B) Masters up to 10.

4. Put the faders to the modified positions.

5. Press the FLASH button of the channels you have changed.

Inserting a Memory

1. Sometimes memories are left out at the programming stage so you may later on in the production process need to insert a new one. Note: These new memories will all be numbered 0.1, 0.2 etc. so it you all the memories from that point forward DON'T get moved up 1 number. This will be confusing for you and even worse mess up the SM's Prompt Book!

2. Turn the Key to Program.

3. Press the Memory Section PREVIEW button.

4. Select the memory before the place you want to insert the new memory.

5. The display will now read 0.1, providing it is the first Point Memory you have inserted.

6. Now program the memory exactly the same way you normally would.