Autofade times are the times you program your lighting memories to fade up and down. You can do many clever things with Autofade Times like create Crosssfades.

1. Turn the Key to program (If it is not already there)

2. Press the Memory section PREVIEW button.

3. Select the memory you are going to add the memory to e.g. Memory 1 (House Lights up.)

Add fade up time

1. Press the FADE TIME button until the LED (small light) next to UP illuminates.

2. Input the fade time using the Minutes, Seconds and Tenth Buttons. (Usually if you just want the lights to go on with hardly any fade but it on at about 2.5 seconds)

3. Press the PROGRAM TIME button.

Add fade down time

1. Press the FADE TIME button until the LED (Small light) next to DOWN illuminates. (Note: After programming fade UP time then it automatically moves onto DOWN)

2. Input the fade time using the minutes, Seconds and Tenths buttons.

3. Press the PROGRAM TIME button

Add a Crossfade.

To create a Crossfade simply make the two fade up and down times the same for the two adjacent memories. E.g. If you want to Crossfade memories 66 and 67 set both fade up and down times to 5 seconds