Next we learn how to program a memories on the board.

Note: Make sure the GRANDMASTER is at 10 the whole time through programming and running the show.

1. Turn the Key to Program

2. Press the MEMORY section PREVIEW button

3. Select the Memory you wish to program by pressing + or -

List of e.g. Memories:

1. House Lights Up

2. House lights down

3. Opening Scene

4. Set up lighting scene as requires use the blue presets (B presets), [by this new mean set the lights you want at the correct levels]

5. To this by pressing the PROGRAM MEMORY button.

6. Use the memory + or - buttons to select next memory to be programmed

7. Repeat Steps 4,5 & 6.